top of page

DISCLAIMER

Universal Aqua is an independent service provider for multi-brand water purification systems and reverse osmosis (RO) devices. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with PUREIT or any other manufacturer.

Comprehensive Services For Pureit's RO In Your City

* For out of warranty units only

Professional Servicing, Repair, Installation & Annual Maintenance Plans by Universal Aqua

Universal Aqua provides professional Pureit RO servicing, repair, installation and Annual Maintenance Contract (AMC) services across Mumbai, Navi Mumbai and Thane. Our services are designed to help maintain consistent performance, address common operational issues, improve filtration efficiency and support the long-term reliability of your Pureit RO system.

Whether your system requires routine servicing, replacement of worn-out components, troubleshooting or a new installation, our service solutions are tailored to your model, operating condition and maintenance requirements.

We believe in transparent pricing, appropriate technical diagnosis and practical maintenance recommendations. Our service charges start at ₹300, with spare parts charged separately wherever required.

Pureit RO General Service: Starting at ₹300 + spare parts, if required.

Regular servicing is an essential part of maintaining the performance and operational reliability of your Pureit RO system. Over time, filters accumulate impurities, internal components experience normal wear, and mineral deposits or other residues may affect system performance.

Universal Aqua offers servicing solutions based on the condition and maintenance requirements of your system.

What Is Included in General Servicing?

Depending on the model and its condition, general servicing may include:

  • System inspection: Examination of the unit's external condition, connections, visible leakage and general operation.

  • Filter condition assessment: Checking the condition of applicable filtration stages and identifying components that may have reached their recommended service life.

  • Flow and performance checks: Assessing water flow, filling time and other observable performance indicators to identify possible restrictions or operational abnormalities.

  • Leakage inspection: Checking accessible tubing, connectors, joints and relevant components for signs of leakage.

  • Pump and electrical checks: Assessing relevant operational symptoms and inspecting accessible connections where appropriate.

  • Cleaning and maintenance: Cleaning accessible serviceable areas and performing maintenance recommended for the particular model.

  • Maintenance guidance: Explaining any observed issues, recommended replacements and future maintenance requirements.

The exact scope depends on the model and the service required. Spare parts, major repairs and component replacements are not included in the base service charge unless specifically agreed.

Pureit RO Annual Maintenance Contract (AMC): Starting at ₹1,200. The exact price depends on the model and applicable service coverage.

An Annual Maintenance Contract can help customers plan routine maintenance and manage the ongoing upkeep of their Pureit RO system.

Universal Aqua offers AMC options starting at ₹1,200, with the exact price depending on the model, its condition and the applicable plan coverage.

Why Consider an AMC?

  • Planned maintenance: Helps establish a maintenance schedule instead of waiting for a problem to occur.

  • Better maintenance tracking: Makes it easier to monitor service history and applicable replacement intervals.

  • Early identification of issues: Routine checks may reveal developing leaks, reduced flow or component wear before they become more disruptive.

  • Convenient service planning: Provides a defined maintenance arrangement according to the agreed terms.

  • Model-specific recommendations: Allows maintenance requirements to be assessed according to the system's design and operating conditions.

What Should You Check Before Choosing an AMC?

AMC coverage can differ substantially between models and service providers. Before confirming a plan, ask for clarity on:

  • Number of scheduled service visits.

  • Whether labour charges for covered repairs are included.

  • Whether filters, membranes and other consumables are included or billed separately.

  • Whether pump, adapter, valve and electrical component replacements are covered.

  • Any exclusions, visit limits or additional charges.

  • The contract duration, applicable service areas and response arrangements.

Important: Do not assume that every spare part or repair is included in the AMC price. Universal Aqua will need to confirm the exact coverage applicable to your model and selected plan.

Important pricing information: The above prices are starting charges. Replacement parts, filters, consumables and additional repair work, where required, are charged separately. The final AMC price depends on the purifier model, service requirements and coverage selected. The applicable charges will be confirmed after assessing the unit and the work required.

Pureit RO Repair Service: Starting at ₹300 + spare parts, if required.

If your system has stopped functioning correctly, is producing water slowly or is showing signs of leakage, a professional diagnosis can help identify the underlying cause.

Universal Aqua provides Pureit RO repair services across Mumbai, Navi Mumbai and Thane for common mechanical, filtration, hydraulic and electrical issues, subject to model compatibility and parts availability.

Common Repair Issues We Address

  • System not starting: Possible causes include an interrupted power supply, a faulty adapter, an electrical connection issue, a control fault or a failed internal component.

  • Low water output: Restricted filters, membrane deterioration, inadequate inlet pressure, tubing restrictions or pump-related issues may reduce output.

  • Unusual operating noise: Abnormal sounds may indicate pump wear, vibration, air in the system or another mechanical issue requiring inspection.

  • Continuous operation: A malfunctioning sensor, valve, control component or pressure-related issue may prevent the system from switching off as intended.

  • Water leakage: Worn seals, loose fittings, damaged tubing, cracked housings or valve-related faults may lead to leakage.

  • Repeated warning indicators: Depending on the model, warning lights or alerts may indicate a maintenance requirement, a consumable replacement or a technical fault.

  • Abnormal taste or odour: Possible causes include overdue filter replacement, membrane deterioration, contamination within serviceable internal sections or problems with the incoming supply. The cause should be assessed rather than assumed.

Our Repair Approach

  1. Inspect the system and understand the reported problem.

  2. Check the relevant components and identify the likely cause.

  3. Explain the recommended repair and any necessary spare parts.

  4. Confirm the applicable charges before proceeding.

  5. Perform the agreed repair and verify operation wherever technically possible.

Repair charges start at ₹300 + spare parts, if required. The final cost depends on the fault, the model and the components involved.

Pureit RO Installation Service: Starting at ₹500 + spare parts, if required.

Correct installation is important for reliable operation, appropriate drainage, secure connections and convenient future maintenance.

Universal Aqua provides Pureit RO installation services in Mumbai, Navi Mumbai and Thane, subject to the suitability of the installation location and the requirements of the particular model.

What Does Installation Involve?

  • Location assessment: Identifying a suitable position with adequate space, access for servicing and a practical arrangement for the inlet, outlet and drainage connections.

  • Mounting or placement: Installing the unit according to the manufacturer's installation requirements and the selected model's design.

  • Inlet connection: Connecting the incoming supply using compatible fittings and checking the connection for leakage.

  • Drainage arrangement: Establishing the required reject-water drainage connection, where applicable, without creating unnecessary bends or obstruction.

  • Electrical connection: Checking the suitability of the power point and relevant electrical connections for models that require electricity.

  • Initial operational checks: Verifying accessible connections, checking for leakage and confirming basic operation in accordance with the model's requirements.

  • Customer guidance: Explaining basic operating precautions, maintenance intervals and signs that may indicate the need for servicing.

Installation charges start at ₹500 + spare parts, if required.

Additional plumbing, drilling, electrical work, extended piping or other modifications may incur separate charges depending on the site and requirements. These should be discussed before work begins.

Your Guide To Pureit Ro Services

* These informations are for general reference only; we do not guarantee its accuracy.

Why Regular Pureit RO Servicing Is Necessary​

Routine maintenance is important because filtration performance, water output and mechanical reliability can change as a system ages and its components accumulate contaminants or experience wear.


1. To Maintain Effective Filtration

Filters and membranes perform different functions within the filtration process. As they accumulate contaminants or deteriorate, their ability to operate as intended may be affected. Timely inspection and replacement according to the manufacturer's recommendations help maintain the system's intended performance.


2. To Address Reduced Water Flow

A noticeable reduction in output may indicate a clogged filter, membrane fouling, inadequate incoming pressure, restricted tubing or a pump issue. Identifying the actual cause helps prevent unnecessary replacement of unrelated components.


3. To Identify Leakage Early

Small leaks around fittings, tubing, seals or housings can cause damage to nearby cabinets and surfaces if left unattended. Periodic inspection helps identify visible signs of leakage before the problem worsens.


4. To Support Pump and Component Reliability

Pumps, valves, sensors and electrical components are subject to operating conditions and normal wear. Appropriate maintenance can help identify developing faults and determine whether repair or replacement is necessary.


5. To Prevent Unnecessary Component Replacement

Not every performance issue requires replacement of multiple filters or internal parts. A proper assessment helps distinguish between a maintenance requirement, a restricted connection, an installation issue and an actual component failure.


6. To Maintain Appropriate Water Quality

Changes in taste, odour, appearance or output may indicate a maintenance issue, but these signs cannot establish whether the water is safe. Where water quality is in doubt, appropriate testing is necessary. Servicing alone cannot guarantee microbiological or chemical safety.


7. To Help Extend the Useful Life of the System

Routine inspections, suitable replacement parts and prompt attention to faults may reduce avoidable operating stress and help preserve the serviceability of the unit.

Decoding Pureit Warning Indicators

The following symptoms can help you recognise when a service inspection may be necessary.

1. Low or Slow Water Output

What you may notice: The storage tank takes longer to fill, the dispensing flow becomes weaker, or the system produces noticeably less water than before.

Possible causes: Filter blockage, membrane fouling, low inlet pressure, restricted tubing, pump deterioration or a malfunctioning valve.

Recommended action: Arrange a system inspection to check the inlet supply, filters, membrane and relevant hydraulic components. Avoid replacing the membrane without confirming that it is responsible for the reduced output.

 

2.Unusual Taste or Odour

What you may notice: Water develops an unfamiliar taste or smell compared with its normal condition.

Possible causes: A filter that requires replacement, a deteriorated membrane, stagnant water in the system, contamination in internal sections or changes in the incoming supply.

Recommended action: Stop using the water for drinking if contamination is suspected, particularly if the change is sudden or unexplained. Arrange an inspection and appropriate water testing where necessary.

 

3.Leakage or Water Accumulation

What you may notice: Dampness below the unit, dripping from connections, water around the storage tank or unexplained moisture near the installation.

Possible causes: Loose connectors, worn seals, damaged pipes, cracked housings or defective valves.

Recommended action: Stop the system and isolate its electrical supply and incoming water supply if this can be done safely. Arrange a repair promptly. Do not handle electrical connections with wet hands or while standing in water.

 

4.Frequent Motor or Pump Operation

What you may notice: The pump starts repeatedly, operates for unusually long periods or makes unfamiliar sounds.

Possible causes: Pressure-related problems, a leak, a faulty sensor, a valve issue or pump wear.

Recommended action: Arrange a technical assessment rather than repeatedly restarting the unit. Continued abnormal operation may place unnecessary stress on components.

 

5.Warning Lights or Maintenance Alerts

What you may notice: The unit displays a warning, flashes an indicator or produces an alert associated with its maintenance system.

Possible causes: A scheduled consumable replacement, a filter-life alert, a system fault or another model-specific condition.

Recommended action: Check the user manual for the meaning of the particular indicator and arrange the appropriate service. Alert meanings differ across Pureit models.

 

6.Frequent Shutdown or Failure to Start

What you may notice: The system stops unexpectedly, fails to start or repeatedly interrupts its operation.

Possible causes: Power supply problems, adapter failure, control-board faults, sensor issues or a mechanical problem.

Recommended action: Have the relevant components inspected by a qualified technician. Avoid opening electrical sections or attempting internal repairs yourself.

 

7.Excessive Reject Water or Continuous Draining

What you may notice: The system appears to discharge water continuously or produces an unusual amount of reject water.

Possible causes: Membrane condition, feed-water pressure, a faulty shut-off valve, control problems or a model-specific operating characteristic.

Recommended action: Have the drainage and shut-off functions checked. Some reject-water discharge is normal for RO systems, so the issue should be assessed against the specifications of your model.

 

8.It Has Been a Long Time Since the Last Service

What you may notice: No recent maintenance record, overdue filter changes or uncertainty about the condition of internal components.

Possible causes: Missed replacement intervals, accumulated contaminants or gradual wear of serviceable components.

Recommended action: Arrange preventive servicing and establish a maintenance schedule based on the manufacturer's recommendations, incoming water conditions and actual usage.

Key Components That Require Timely Swaps

  • External Pre-Sediment Layer: Catches large dirt particles, floating sand, and rust flakes before they enter the internal core.

  • Timeline: Inspect and change every 3 to 5 months.

  • Carbon Block Adsorbent: Neutralizes harsh chlorine, foul smells, and organic compounds that damage the delicate membrane underneath.

  • Timeline: Replace every 6 months.

  • High-Recovery RO Membrane: The central barrier that extracts microscopic dissolved impurities, hard salts, and heavy metal ions.

  • Timeline: Swap every 12 to 18 months (depending on incoming water hardness).

  • Germkill Kit (GKK) Assembly: An all-in-one encapsulated module that bundles multiple purification stages together for easy swap-outs.

  • Timeline: Replaced immediately when the digital alert panel trips (typically tied to volumetric liters processed).

  • Mineral / Copper Enrichment Cartridge: Adds back essential trace elements and infuses healthy copper ions into purified water.

  • Timeline: Refresh annually to keep water tasting fresh and balanced.

Our Service Process

Universal Aqua aims to make the servicing process straightforward and transparent.

Step 1: Understand Your Requirement

Tell us whether you need routine servicing, repair, installation or an AMC. Sharing the model number and a description of the problem helps us understand the requirement.

Step 2: Assess the System

The relevant components and observable operating symptoms are checked to identify the likely maintenance or repair requirement.

Step 3: Explain the Recommended Work

The technician explains the identified issue, proposed work and any spare parts that may be needed.

Step 4: Confirm the Charges

Applicable service charges and additional component costs should be discussed before the agreed work proceeds.

Step 5: Complete the Service

The agreed maintenance, repair or installation work is carried out according to the system's requirements.

Step 6: Check Operation and Provide Guidance

Relevant operational checks are performed where possible, and the customer is informed about completed work and future maintenance requirements.

Areas We Serve : Mumbai, Navi Mumbai & Thane

Universal Aqua provides Pureit RO servicing, repair, installation and AMC services across the following locations, subject to service-area coverage and appointment availability.

Mumbai City & Suburbs:

​

  • Colaba, Fort, Nariman Point, Churchgate, Marine Lines, Byculla, Worli, Lower Parel, Dadar, Prabhadevi, Bandra, Khar, Santacruz, Vile Parle, Andheri, Jogeshwari, Goregaon, Malad, Kandivali, Borivali, Dahisar, Kurla, Ghatkopar, Vikhroli, Kanjurmarg, Bhandup, Mulund, Chembur, Trombay.

Thane Region:

  • Thane (West & East), Naupada, Kopri, Ghodbunder Road, Majiwada, Vartak Nagar, Manpada, Wagle Estate.

Navi Mumbai Nodes:

​

  • Airoli, Rabale, Ghansoli, Mahape, Vashi, Nerul, CBD Belapur, Kharghar, Kamothe, Kalamboli, Panvel.

Frequently asked questions 

Q: When and why does my Pureit RO system need servicing? A: Servicing is required every 3 to 4 months for routine health checks, tank sanitization, and pre-filter cleaning. Full component replacements are needed every 6–12 months for pre/post-filters and every 12–24 months for the RO membrane. You should also book a service immediately if you notice reduced water flow, an unusual or metallic taste, excessive drain water, or active warning lights on the front panel.

Q: Why is on-time servicing so critical for my Pureit purifier? A: Delaying service risks exposing your family to unsafe water, as expired filters lose their ability to trap bacteria, heavy metals, and micro-contaminants. Additionally, Pureit systems trigger an automated sensor lockout when filter capacity runs out, stopping water flow entirely. Timely maintenance also prevents high pressure buildup in the booster pump, saving up to 30% on long-term repair costs.

Q: What do the alert lights and beeps mean on my Pureit Classic or Classic G2 model? A: Blinking Red Light + 2 Beeps (every 15 mins): This is the Advance Alert showing that your Germkill Kit (GKK) has about 15 days of life remaining. Solid Red Light: The GKK is fully exhausted, and the Auto Shut-Off system has locked the unit to prevent unpurified water from dispensing. A technician must replace the GKK and reset the memory pins.

Q: What should I do if my Pureit Copper+ or Ultima screen displays "Change GKK" or emits a continuous beep? A: "Change GKK" or Copper Level Warning: The internal 7-stage Germkill Kit or active copper enrichment cartridge has reached capacity and requires replacement. Red Light + Continuous Beep: Indicates a system or sensor fault, such as low inlet water pressure, a stuck storage tank float switch, or a UV choke failure that requires a technical inspection.

Q: Why has the water flow slowed down on my Pureit Eco Water Saver model? A: A drop in output velocity is usually caused by heavy scaling on the high-recovery Eco RO membrane or clogging in the sediment and carbon cartridges. A technician will need to perform high-pressure descaling or replace the clogged cartridges.

Q: Why is my Pureit RO system generating excessive drain water? A: High drain-to-purified water ratio happens when the high-recovery RO membrane accumulates heavy mineral scaling or when the pre-sediment and carbon block filters become clogged. This restriction forces more water out through the reject line. High-pressure membrane descaling or replacing the clogged pre-filter stages will restore the correct recovery balance.

Q: Can Universal Aqua help with uninstallation, wall-mounting, or relocation? A: Yes, Universal Aqua provides complete uninstallation, transport preparation, re-installation, wall-mounting, under-sink plumbing setups, and post-relocation TDS calibration for all Pureit models across Mumbai.

bottom of page