The material 1.4521 is a ferritic chrome steel with very good resistance against pitting corrosion. Due to its low tendency to work hardening, it is often used for heat exchanger tubes and tubular heating elements. Show Ferritic Stainless Steel materials with Elastic modulus of 220 GPa at 20 °C. Elongation A5. A 5. 1.4526 / X6CrMoNb17
1.4529 (AL-6XN®), N08904 Datasheet METALCOR1.4529 / Al-6XN® is a super-austenitic stainless steel, similar to 1.4539 / AISI 904 L, but with higher molybdenum and nitrogen content. Extremely high resistance to pitting and crevice corrosion in halide media. Excellent general corrosion resistance in a wide range of media, both oxidizing and reducing.
1.4539 is one of the best acid-resistant austenitic grades that is an alternative to 1.4547 and 1.4529 steels. Comparable corrosion resistance up to 904L has duplex steels with a ferritic-austenitic structure of 1.4462 / X2CrNiMoN22-5-3 / UNS S31803 and S32205, but their increased mechanical properties may in certain situations limit the use of
6Mo / 1.4529 - hempel-metals6Mo / 1.4529 The austenitic stainless steel 6Mo was developed on basis of Alloy 904l / 1.4539. However, the molybdenum content at 6Mo was raised to 6.5%. 6Mo has excellent general corrosion resistance and improved resistance to pitting and crevice corrosion. The resistance to stress corrosion cracking is also increased.
AISI 926 - Equivalent MaterialsThere are 16 equivalent materials for AISI 926 Stainless Steel. See the equivalents for DIN, AFNOR, BS, AISI, SAE, EN, ISO and UNS.
Custom 1.4529(n08926) Stainless Steel Fastener Hex Bolts And Nuts Set , Find Complete Details about Custom 1.4529(n08926) Stainless Steel Fastener Hex Bolts And Nuts Set,1.4529 Bolt,1.4529(n08926),1.4529 25-6mo Uns No8926 Bolts And Nuts Washers from Bolts Supplier or Manufacturer-Nanjing Xidiou Stainless Steel Co., Ltd.
Material Data Sheet 1.4529, alloy 926, N 08926 ::M. Woite Description 1.4529 (alloy 926) is an austenitic special steel with high molybdenum content and low carbon content. Our product range in 1.4529 are tubes and pipes, fittings and flanges, accessories.
Stainless Steel Grade EN 1.4547Rolf Engg Solutons is the supplier of EN 1.4547 plates, Exporter of stainless steel coils grade EN 1.4547, trader of EN 1.4547 flat bars
Rolf Engg Solutions is the trader of EN 1.4429 stainless steel plate, exporter of EN 1.4429 forgings, supplier of grade EN 1.4429 strips
Stainless Steel - Grade EN 1.4529Rolf Engg Solution is the supplier of stainless steel plates grade EN 1.4529, exporter of EN 1.4529 sheets, trader of EN 1.4529 forgings
Stainless steel grades listed in the international standard ISO 15510:2010 Comparative designations of grades with similar composition from other important standards. (listed by type of steel structure and by increasing intermediate 3-digits code of the ISO name) Type ISO-Name (1) ISO Designation EN UNS AISI
Steel grade 1.4539 (UNS N08904 - 904L-SS2562) in stainless The steel grade 1.4539 ( also called UNS N08904, 904L and SS2562) is a high alloyed austenitic stainless steel with very good corrosion resistance. The steel is developed to resist corrosion in dilute sulphuric acid and it is suitable to use in details placed in severe corrosion environments e.g.
Steel grade 1.4547 (UNS S31254 - 254 SMO® - SS2378) in 1.4547 (also called UNS S31254, 254 SMO®* and SS2378) is a high alloyed austenitic stainless steel with exceptionell corrosion resistance. The steel is developed for use in halide-containing environment such as seawater, hydrochloric acid and contaminated sulphuric acid. 1.4547 has a superior resistance to uniform corrosion compared with
Ultra 254 SMO EN 1.4547, ASTM UNS S31254 stainless steel grade details. Help us make Steel Finder better! Ultra 254 SMO is a 6% molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the 1.4529, Alloy 926, UNS N08926 - stainless steelStainless steel 1.4529, X1NiCrMoCuN25-20-7, Alloy 926, UNS N08926 resistant to intergranular corrosion according to EN 10088-1 1.4529, X1NiCrMoCuN25-20-7 - specification and application 1.4529 grade is high alloyed stainless steel with an austenitic structure, which can be classified as nickel alloys (according to American standards).